Please note: Your decals are covered with a protective masking, which will be removed after application. This hold the graphics in place. It also gives the decals more body, keeping them from tearing. folding, getting scratched, etc.
You will need: Your decal(s), window cleaner, paper towels, a spray bottle and a small dry towel or squeegee
Please read instructions completely before starting application.
Clean the surface where you are applying decal. Window cleaner or an ammonia based cleaner works best, as it will leave little residue. Brush off any lint.
Carefully remove backing paper from the decal, making sure not to touch the back of the decal to itself.
Lightly wet the back of the decal by misting with water OR 99% water/1% dishsoap mixture. (Soap mixture gives you a little more play in movement.) Do not use an alcohol or ammonia based product, as it will compromise the adhesive.
Holding the decal by the left and right sides, and keeping the decal flat, place the decal against the surface. The water will keep the decal from sticking right away, to give you time to get the placement right.
Once the decal is where you want it, carefully and firmly push the water out with a squeegee or dry towel. Let dry. A credit card will also work nicely as a squeegee.
Remove top masking and tah-dah!
Any air bubbles can be popped with a straight pin, then smoothed with a finger.